A06B MSOP-8
Abstract: 7805K 100 micro farad capacitor 0.1 micro farad capacitor datasheet OP AMP 7505 10 micro farad 16V capacitor 100 micro farad 16V capacitor 0.01 micro farad capacitor 4.7 micro farad 16V capacitor audio transformer 600ohm
Text: LMC6035/LMC6036 Low Power 2.7V Single Supply CMOS Operational Amplifiers General Description Features The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package 8-Bump micro SMD using National’s micro SMD package technology.
|
Original
|
PDF
|
LMC6035/LMC6036
LMC6035/6
LMC6035
pdf/2000/LMC6035
20-Jul-2001]
A06B MSOP-8
7805K
100 micro farad capacitor
0.1 micro farad capacitor datasheet
OP AMP 7505
10 micro farad 16V capacitor
100 micro farad 16V capacitor
0.01 micro farad capacitor
4.7 micro farad 16V capacitor
audio transformer 600ohm
|
smd capacitor 106 35k
Abstract: 100 micro farad capacitor datasheet 0.1 micro farad capacitor 10 micro farad 16V capacitor 100 micro farad capacitor 7805K 100 micro farad 16V capacitor capacitor 270 micro farad smd capacitors 10 Micro Farad 10 micro farad capacitor
Text: LMC6035/LMC6036 Low Power 2.7V Single Supply CMOS Operational Amplifiers General Description Features The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600Ω. LMC6035 is available in a chip sized package 8-Bump
|
Original
|
PDF
|
LMC6035/LMC6036
LMC6035/6
LMC6035
specificati112
12-Jun-2002
5-Aug-2002]
smd capacitor 106 35k
100 micro farad capacitor datasheet
0.1 micro farad capacitor
10 micro farad 16V capacitor
100 micro farad capacitor
7805K
100 micro farad 16V capacitor
capacitor 270 micro farad
smd capacitors 10 Micro Farad
10 micro farad capacitor
|
Untitled
Abstract: No abstract text available
Text: Y5V Dielectric General Specifications Y5V formulations are for general-purpose use in a limited temperature range. They have a wide temperature characteristic of +22% –82% capacitance change over the operating temperature range of –30°C to +85°C. These characteristics make Y5V ideal for decoupling applications within limited temperature range.
|
Original
|
PDF
|
|
Untitled
Abstract: No abstract text available
Text: X7S Dielectric General Specifications GENERAL DESCRIPTION X7S formulations are called “temperature stable” ceramics and fall into EIA Class II materials. Its temperature variation of capacitance is within ±22% from –55°C to +125°C. This capacitance change is
|
Original
|
PDF
|
|
capacitor ceramic 100 nano farad 63 volts
Abstract: No abstract text available
Text: X5R Dielectric General Specifications GENERAL DESCRIPTION • General Purpose Dielectric for Ceramic Capacitors • EIA Class II Dielectric • Temperature variation of capacitance is within ±15% from -55°C to +85°C • Well suited for decoupling and filtering applications
|
Original
|
PDF
|
|
LT 0246
Abstract: LT06
Text: MLCC Low Profile General Specifications GENERAL DESCRIPTION AVX introduces the LT series comprising a range of low profile products in our X5R dielectric. X5R is a Class II dielectric with temperature varation of capacitance within ±15% from –55°C to +85°C. Offerings include 0402, 0603, 0805, and 1206 packages in
|
Original
|
PDF
|
|
Untitled
Abstract: No abstract text available
Text: CECC Ceramic Chips FEATURES High Reliability CECC Ceramic Chips Capacitors for Military & Avionics applications HOW TO ORDER AN 13 Z E 0104 Voltage Capacitance AVX Style Size Class AN = Nickel Barrier + SnPb finish AC = Silver Palladium 12 = 0805 20 = 1206
|
Original
|
PDF
|
|
Untitled
Abstract: No abstract text available
Text: Hi-Q High RF Power MLC Surface Mount Capacitors For 600V to 7200V Application PRODUCT OFFERING Hi-Q®, high RF power, surface mount MLC capacitors from AVX Corporation are characterized with ultra-low ESR and dissipation factor at high frequencies. They are designed to handle high power and
|
Original
|
PDF
|
00V/630V
EIA-556.
|
smd code capacitor color
Abstract: 1 micro farad capacitor Piezo Ceramic plates LD08 LD12 LD20 capacitor 47 nano 1 micro farad capacitor 50 VOLT 10-25 L D4 capacitor smd
Text: MLC Chip Capacitors Basic Construction A multilayer ceramic MLC capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. This simple structure requires a
|
Original
|
PDF
|
EIA-556.
smd code capacitor color
1 micro farad capacitor
Piezo Ceramic plates
LD08
LD12
LD20
capacitor 47 nano
1 micro farad capacitor 50 VOLT
10-25 L D4 capacitor smd
|
Untitled
Abstract: No abstract text available
Text: X7R Dielectric General Specifications X7R formulations are called “temperature stable” ceramics and fall into EIA Class II materials. X7R is the most popular of these intermediate dielectric constant materials. Its temperature variation of capacitance is within ±15% from
|
Original
|
PDF
|
|
capacitor 47 micro farad
Abstract: LD08 LD12 LD20 capacitor 47 nano
Text: MLC Chip Capacitors Basic Construction A multilayer ceramic MLC capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. This simple structure requires a
|
Original
|
PDF
|
EIA-556.
capacitor 47 micro farad
LD08
LD12
LD20
capacitor 47 nano
|
Untitled
Abstract: No abstract text available
Text: X8R Dielectric General Specifications AVX have developed a range of multilayer ceramic capacitors designed for use in applications up to 150ºC. These capacitors are manufactured with an X8R dielectric material which has a capacitance variation of ±15% between -55ºC and +150ºC.
|
Original
|
PDF
|
|
Untitled
Abstract: No abstract text available
Text: IDC Low Inductance Capacitors RoHS 0612/0508 IDC (InterDigitated Capacitors) GENERAL DESCRIPTION • Very low equivalent series inductance (ESL), surface mountable, high speed decoupling capacitor in 0612 and 0508 case size. • Measured inductances of 60 pH (for 0612) and 50 pH (for 0508)
|
Original
|
PDF
|
|
Piezo Ceramic plates
Abstract: LD08 LD12 LD20 capacitor 47 nano 1 micro farad capacitor 50 VOLT
Text: MLC Chip Capacitors Basic Construction A multilayer ceramic MLC capacitor is a monolithic block of ceramic containing two sets of offset, interleaved planar electrodes that extend to two opposite surfaces of the ceramic dielectric. This simple structure requires a
|
Original
|
PDF
|
EIA-556.
Piezo Ceramic plates
LD08
LD12
LD20
capacitor 47 nano
1 micro farad capacitor 50 VOLT
|
|
|
0.01 micro farad capacitor
Abstract: No abstract text available
Text: MIL-PRF-55681/Chips Part Number Example CDR01 thru CDR06 MILITARY DESIGNATION PER MIL-PRF-55681 Part Number Example CDR01 L W D t BP 101 B K S M MIL Style Voltage-temperature Limits Capacitance T Rated Voltage Capacitance Tolerance Termination Finish Failure Rate
|
Original
|
PDF
|
MIL-PRF-55681/Chips
CDR01
CDR06
MIL-PRF-55681
CDR01
CDR01,
CDR02,
CDR03,
CDR04,
CDR05,
0.01 micro farad capacitor
|
AVX 3640
Abstract: capacitor 47 nano
Text: C0G NP0 Dielectric General Specifications C0G (NP0) is the most popular formulation of the “temperature-compensating,” EIA Class I ceramic materials. Modern C0G (NP0) formulations contain neodymium, samarium and other rare earth oxides. C0G (NP0) ceramics offer one of the most stable capacitor
|
Original
|
PDF
|
30ppm/
AVX 3640
capacitor 47 nano
|
Internal MLCC cracking result serious failure mode
Abstract: No abstract text available
Text: Low Inductance Capacitors Introduction Multiple terminations of a capacitor will also help in reducing the parasitic inductance of the device. The IDC is such a device. By terminating one capacitor with 8 connections the ESL can be reduced even further. The measured inductance
|
Original
|
PDF
|
|
Internal MLCC cracking result serious failure mode
Abstract: capacitor 47 nano MLCC rework MLCC CRACK
Text: Low Inductance Capacitors Introduction Multiple terminations of a capacitor will also help in reducing the parasitic inductance of the device. The IDC is such a device. By terminating one capacitor with 8 connections the ESL can be reduced even further. The measured inductance
|
Original
|
PDF
|
|
IC AT MEGA 8
Abstract: ups APS rs 1000
Text: APS Series APS for COTS+ Applications GENERAL DESCRIPTION As part of our continuing support to high reliability customers, AVX has launched an Automotive Plus Series of parts APS qualified and manufactured in accordance with automotive AEC-Q200 standard. Each production batch is
|
Original
|
PDF
|
AEC-Q200
IC AT MEGA 8
ups APS rs 1000
|
10-25 L D4 capacitor smd
Abstract: 272K-A EIA standards 1.25 esr
Text: High Voltage MLC Chips FLEXITERM For 600V to 3000V Application High value, low leakage and small size are difficult parameters to obtain in capacitors for high voltage systems. AVX special high voltage MLC chips capacitors meet these performance characteristics and are
|
Original
|
PDF
|
EIA-556.
10-25 L D4 capacitor smd
272K-A
EIA standards 1.25 esr
|
Untitled
Abstract: No abstract text available
Text: Tip & Ring Tin/Lead Termination “B” Multilayer Ceramic Chip Capacitors AVX Corporation will support customers for commercial and military Multilayer Ceramic Capacitors with a termination consisting of 5% minimum lead. This termination is indicated by the use of a “B” in the 12th position of the AVX
|
Original
|
PDF
|
EIA-556.
|
failure rate avx 0201 ceramic capacitor
Abstract: LICC Internal MLCC cracking result serious failure mode
Text: Low Inductance Capacitors Introduction Multiple terminations of a capacitor will also help in reducing the parasitic inductance of the device. The IDC is such a device. By terminating one capacitor with 8 connections the ESL can be reduced even further. The measured inductance
|
Original
|
PDF
|
|
Ceramic Dielectric Axial Capacitors Glass Encapsulated
Abstract: AVX CHIP COMPONENT
Text: Hi-Q High RF Power Ribbon Leaded MLC Capacitors Hi-Q®, High RF Power, Ribbon Leaded MLC Capacitors from AVX Corporation are characterized with ultra-low ESR and dissipation factor at high frequencies. The HQL-style parts are constructed using nonmagnetic materials. They are designed to handle high power and high
|
Original
|
PDF
|
00V/630
EIA-556.
Ceramic Dielectric Axial Capacitors Glass Encapsulated
AVX CHIP COMPONENT
|
Untitled
Abstract: No abstract text available
Text: Tip & Ring Multilayer Ceramic Chip Capacitors AVX “Tip & Ring” or “ring detector” Multilayer Ceramic Chip Capacitors are designed as a standard telecom filter to block -48 Volts DC telephone line voltage and pass subscriber’s AC signal pulse 16 to 25Hz, 70 to 90Vrms .
|
Original
|
PDF
|
90Vrms)
EIA-556.
|
